Preliminary Steps; Removing The Defective Fjbu; Installing The New Fjbu; Concluding Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Ê Remove the CMA stopper with the mounted crossbar (see figure 32).
Ê Hold the CMA stopper, the crossbar and the CMA including cables in the one
hand.
Ê Remove the FJBU and install the new FJBU carefully.
Ê Mount the complete assembly (CMA stopper, the crossbar and the CMA)
again into the rail.
6.4.3.1

Preliminary steps

"Locating the defective server" on page 50
Ê
6.4.3.2

Removing the defective FJBU

Ê Remove the FJBU as described in
6.4.3.3

Installing the new FJBU

Ê Install the FJBU as described in section
6.4.3.4

Concluding steps

Ê No steps needed.
RX1330 M3
"Removing an FJBU" on page
Upgrade and Maintenance Manual
Power supply unit (PSU)
"Installing an FJBU" on page
123.
122.
125