System board and components
14.3.3 Replacing the UFM
Upgrade and Repair Unit
(URU)
Tools: – Phillips PH1 / (+) No. 1 screw driver
– combination pliers and flat nose pliers
14.3.3.1 Preliminary steps
"Locating the defective server" on page 50
Ê
"Suspending BitLocker functionality" on page 71
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Remove the riser module 3 as described in section
module" on page
14.3.3.2 Removing the defective UFM
Ê Remove the UFM as described in section
page
280.
Ê The UFM spacer remains on the system board.
282
66.
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 5 minutes
"Removing a riser
"Removing the UFM" on
RX1330 M3