Installing The Odd - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX1330 M3:

Table of Contents

Keep the dummy cover for future use. If you remove the accessible drive

again and do not replace it with a new one, the dummy cover must be

reinstalled to comply with EMC regulations and to satisfy cooling

requirements and fire protection measures.

12.2.1.3 Installing the ODD

Figure 160: ODD latch on fan bridge

Ê If no ODD has been installed before: remove the two screws and take the

ODD latch from the fan bridge.

Upgrade and Maintenance Manual

Accessible drives