Preliminary Steps; Removing A Hot-Plug Psu - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Power supply unit (PSU)
6.3.2.1

Preliminary steps

No steps needed.
6.3.2.2

Removing a hot-plug PSU

Ê Remove the power cord from the dedicated PSU as described in section
"Disconnecting the power cord" on page 54
Figure 34: Unlocking and removing the hot-plug PSU
Ê Push the handle of the PSU halfway upward in the direction of the arrow (1).
Ê Push the lock in direction of the arrow (2).
Ê Grip the handle and pull out the PSU in the direction of the arrow (3).
V
CAUTION!
Never leave the bay for the PSU empty. Install a new PSU or install the
dummy cover.
114 Upgrade and Maintenance Manual
.
RX1330 M3