14.6.3 Replacing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Tools: a pair of side-cutting pliers
14.6.3.1 Preliminary steps
"Locating the defective server" on page 50
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Remove the riser module 1 as described in section
module" on page
14.6.3.2 Replacing the iRMC microSD card
Ê Remove the defective iRMC microSD card as described in section
"Removing the iRMC microSD card" on page
Ê Install the new iRMC microSD card as described in section
iRMC microSD card" on page
14.6.3.3 Concluding steps
Ê Install the riser module 1 as described in section
on page
68.
"Reassembling" on page 60
Ê
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê
RX1330 M3
66.
298.
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
"Removing a riser
300.
"Installing a riser module"
"Installing the
301