Removing The Tpm - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

System board and components
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê
"Resuming BitLocker functionality" on page 95
Ê
Ê Enable TPM in the system board BIOS. Proceed as follows:
Ê Switch on or restart your server.
Ê As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
Ê Select the Advanced menu.
Ê Select the Trusted Computing submenu.
Ê Set the TPM Support and TPM State settings to Enabled.
Ê Under Pending TPM operation, select the desired TPM operation mode.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the corresponding BIOS Setup Utility reference
manual.

14.4.2 Removing the TPM

Field Replaceable Unit
(FRU)
Tools: Removing the system board:
– Phillips PH2 / (+) No. 2 screw driver
Removing the TPM:
– Bit screw driver
– flat nose pliers
– TPM bit insert
( )
* For Japan:
– TPM module fixing tool (S26361-F3552-L909)
288
( )
*
Upgrade and Maintenance Manual
Hardware: 30 minutes
RX1330 M3