Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual page 203

Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I
Configuration of network settings should be performed by the
customer. For further information, please refer to section
network settings recovery" on page
Ê If applicable, restore LAN teaming configurations, see
upgrading LAN controllers" on page 99
RX1330 M3
Upgrade and Maintenance Manual
Expansion cards and backup units
201.
"After replacing /
.
"Note on
203