Siemens SIMOCODE pro Operating Manual page 32

Parameters
4.1 Motor protection
Schematic
The following schematic shows the "Extended Protection" function block ("Overload protection,"
"Unbalance protection," and "Stalled rotor protection") with optional parameter settings and events.
Figure 4-1
1) Adjustable transformation ratio when using interposing transformers with
SIMOCODE pro V PB, version *E03* and higher
2) If tripped due to overload
32
"Extended Protection" function block ("Overload Protection," "Unbalance Protection," and
"Stalled Rotor Protection")
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001