Response to warning level
Here you can define how SIMOCODE pro will respond if the warning level is undershot.
See also "Tables of responses of SIMOCODE pro" in Chapter Important information
(Page 7).
Table 4- 37
Response
Deactivated
signal
warn
tripping
Delay
Hysteresis
Here you can set the hysteresis for current limits I< (lower limit):
Hysteresis
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
"Warning level" response for monitoring current limits I <
0 to 15% of the level value in steps of 1%
Default setting: 5 %
4.3 Monitoring functions
Warning level
X (d)
X
X
—
0 to 25.5 s (default: 0.5 s)
Parameters
139