Siemens SIMOCODE pro Operating Manual page 277

Response to trip level 0/4 to 20 mA > (upper limit),
0/4 to 20 mA < (lower limit), 0/4 to 20 mA
monitoring, 149
Response to trip level 0/4 to 20 mA> (upper limit),
0/4 to 20 mA< (lower limit), 0/4 to 20 mA
monitoring, 149
Response to trip level P> (upper limit), P< (lower limit),
active power monitoring, 146
Response to trip level, cos phi monitoring, 144
Response to trip level, ground-fault
monitoring, 128, 133
Response to trip level, monitoring current limits
I< (lower limit), 138
Response to trip level, monitoring current limits
I> (upper limit), 136
Response to trip level, monitoring voltage, 141
Response to warning level P> (upper limit), P< (lower
limit), active power monitoring, 146
Response to warning level, cos phi monitoring, 144
Response to warning level, ground-fault
monitoring, 129, 133
Response to warning level, monitoring current limits
I< (lower limit), 139
Response to warning level, monitoring current limits
I> (upper limit), 137
Response to warning level, monitoring voltage, 142
Response, monitoring temperature, 158
Restart time delay, 218
Reversing starter, 61, 67, 78, 119
Reversing starter control function, 76
Reversing starter settings, 78
Runtime license V7, 30
Runtime license V8, 30
S
Safe tripping, DM-F Local, 19
Safe tripping, DM-F PROFIsafe, 19
Safety-related tripping, 203, 220
Saving change-over
command, 68, 78, 89, 92, 96, 99, 103, 118
Screw terminals, 12
Sensor circuit fault, 51
Sensor fault, 51
Separate fail-safe function from control
function, 73, 75, 78, 81, 85, 89, 92, 96, 99, 103, 106,
111, 114, 118
Separating DM-FL/FP function from control function, 69
Set current Is1, 34, 34
SET/RESET button DM-F Local, 221
Setting ranges for current setting Is2, 35
Setting ranges for current setting ls1, 34
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
Settings for analog module output, 171
Settings for DM1 / DM2 inputs, 191
Settings for external fault, 211
Settings for power failure monitoring (UVO), 218
Settings for truth table 2I/1O, 238
Settings for truth table 3I/1O, 236
Settings for truth table for 5I / 2O, 239
Settings of the DIP switches (DM-F PROFIsafe), 225
Settings of the DIP switches on the DM-F Local, 222
Signal conditioning, 247
Signal conditioning 1 (2, 3, 4, 5, 6), 19
Signal conditioning settings, 250
SIMATIC S7, 27
SIMOCODE ES, 211
SIMOCODE ES 2007, 26
SIMOCODE ES 2007 Basic, 29
SIMOCODE ES 2007 Premium, 29
SIMOCODE ES 2007 Standard, 29
SIMOCODE ES in the TIA Portal, 25
SIMOCODE ES V14 Basic, 28
SIMOCODE ES V14 Premium, 28
SIMOCODE ES V14 software download, 28
SIMOCODE ES V14 Standard, 28
SIMOCODE pro block library for SIMATIC PCS 7
Version V7, 30
SIMOCODE pro block library for SIMATIC PCS 7
Version V8 with Advanced Process Library (APL), 30
SIMOCODE pro PCS 7 library, 27
Sockets (analog), 13
Sockets (binary), 13
Soft run-down time, 118
Soft starter, 61, 67, 119
Soft starter control function, 112, 114
Soft starter with reversing contactor, 61, 67, 118, 119
Soft starter with reversing contactor control
function, 115
Soft starter with reversing contactor settings, 118
Software, 24, 24
Software Update Service, 28, 28, 29, 29
Solenoid valve, 61, 67, 106, 119
Solenoid valve control function, 104
Solenoid valve control function settings, 106
Stalled rotor level, 49
Stalled rotor protection, 49
Standard function blocks, 203
Standard functions, 202
Star-delta connection, 87, 122
Star-delta reversing starter, 61, 67, 89, 119
Star-delta reversing starter control function, 86
Star-delta reversing starter settings, 89
Star-delta starter, 61, 67, 85, 119
Star-delta starter control function, 82
Index
277