Ricoh MP C4503 Technical Bulletin page 96

Reissued: 22-Dec-16
Model:
MET-C1ab_SOP
Version
- A user name that has been set to be used as a "Destination" in Ridoc IO Device
Manager Lite does not appear in Quick Scanner.
02.24 Symptom corrected:
When the Delivery Option is set to ON and a user logs on to the printer, the Delivery
Server Destination List might not be available.
02.23 Symptom corrected:
1. When opening a program after Simple Screen has been applied on the home screen,
the program settings are not retrieved.
2. Max. Email Size for scanner send settings cannot be configure via DMNX.
3. When scanning with "Hungarian" or "Polish" selected under "Cognitive Language" in
"OCR Settings", if the value of a Unicode character exceeds 256, then the character
will be converted to a question mark ("?").
02.22 Symptom corrected:
1. When Simplified Chinese is selected in the "Insert Additional Email Info" setting in
Send Settings, text in an email sent by using Scan to URL is garbled.
2. When the "Start Scanning" button is pressed in the Scan to Me application, scanning
is not performed.
3. When user code authentication is set on the device, an authentication error occurs
when using an application based on the SmartSDK.
02.21 Symptom corrected:
1. When using a TWAIN driver in certain software applications, such as Pneumologis,
an SC899 error occurs.
2. When a user executes a job in a SmartSDK application after using the Quick Scanner
application, the home screen is displayed.
02.20 Symptom corrected:
-
02.19 Specification Change:
-
Symptom corrected:
-
02.18 Symptom corrected:
-
02.17 Specification Change:
1. Supported RICOH SmartSDK v[1.02].
Symptom corrected:
1. The following problems were fixed in applications that use the Ricoh SmartSDK API.
-
-
-
-
T
echnical
Modified Points or Symptom Corrected
This firmware is dependent on the following firmware module. Please be sure to
update it:
- System/Copy firmware: v3.13 or later
If user authentication is enabled, the address book cannot be updated from Web
Image Monitor when the device is in energy-saving mode.
Supported RICOH SmartSDK v1.04.
Minor bug correction.
Minor bug correction
When scanned documents are sent to the Document Server of the MFP, the
filename cannot be blank.
When the same destination is set multiple times, the total number of destinations
are counted.
After Scan To Me is performed, the SmartSDK scan function or legacy
applications that use the scan function might fail.
When the sending of a scan is cancelled, the cancellation is not recorded in the job
B
ulletin
Date:
01-Aug-13
PAGE: 2/3
No
RD147038o
.: