Ricoh MP C4503 Technical Bulletin page 498

Model:
MET-C1b
Subject:
Main SP Table for Waste Toner Full Detection
From:
1st Tech Service Sect., MFP/P Tech Service Dept.
Classification:
Service Manual Correction
The areas highlighted in
SP3-XXX (Process)
3800 [Waste Toner Full Detection]
Condition
001
Detects the waste toner bottle status.
Page Count 1 After Near Full
002
Counts the number of pages printed after 'Near Full' detection.
Volume Count 1 After Near
Full
003
Calculates the amount of waste toner after 'Near Full' detection.
Volume Count 1 After
Replacement
004
Calculates the amount of waste toner since 'Near Full' was detected until the waste
toner bottle was replaced with a new one.
Volume Count 2 After
005
Replacement
echnical
T
Troubleshooting
Mechanical
Paper path
Product Safety
and crossed out were added/deleted.
blue bold
ulletin
B
Date:
2-Feb-16
Prepared by:
Part information
Electrical
Transmit/receive
Other ( )
[0 to 4 / 0 / 1/step]
0: New (first bottle)
1: Normal
*ENG
2: Near full (or detecting new bottle)
3: Full or (or detecting new bottle)
4: Unknown
*ENG [0 to 10000000 / 0 / 1/sheet]
*ENG [0 to 10000000 / 0 / 0.1/mg]
*ENG [0 to 10000000 / 0 / 0.1/mg]
*ENG [0 to 10000000 / 0 / 0.1/mg]
PAGE: 1/2
No.:
RD147153
Y. Ino
Action required
Service manual revision
Retrofit information
Tier 2