Ricoh MP C4503 Technical Bulletin page 371

echnical ulletin
T B
PAGE: 7/7
Model: Date: No.:
General RTB 23-Oct-14 RGene074
4-2-3) After booting Java VM, the application will start being updated. "Updating SDK/J"
will appear in the banner message of the panel display.
4-2-4) When the update is complete, "Update SDK/J done SUCCESS" will appear in the
banner message of the touchscreen display. Turn off the device and remove the SD card
from the slot.
4-2-5) Reconfigure the heap size by selecting "Extended Feature Settings", navigating to
"Administrator Tools", and setting the value in "Heap/Stack Size Settings".
5) Install "SDKService" (Smart Operation Panel application)
5-1) Go into screen service mode.
5-2) Insert the SD card into the SD card slot of Panel.
5-3) Select "Applications", press "Install", and then push "Install from SD card".
5-4) Select only ""SDKService"" and press "Install".
5-5) When the result of updating "SDKService" appears, confirm that it is the correct
updated version and then press and hold down the "Panel reboot" button.
6) Install "Web Browser NX" (Smart Operation Panel application)
6-1) Go into screen service mode.
6-2) Insert the SD card into the SD card slot of Panel.
6-3) Select "Applications", press "Install", and then push "Install from SD card".
6-4) Select only "Web Browser NX" and press "Install".
6-5) When the result of updating "Web Browser NX" appears, confirm that it is the correct
updated version and then press and hold down the "Panel reboot" button.
7) Install "QRcode" (Smart Operation Panel application)
7-1) Go into screen service mode.
7-2) Insert the SD card into the SD card slot of Panel.
7-3) Select "Applications", press "Install", and then push "Install from SD card".
7-4) Select only "QRcode" and press "Install".
7-5) When the result of installing the "QRcode" application appears, confirm that it is the
correct updated version and then press and hold down the "Panel reboot" button.