Ricoh MP C4503 Technical Bulletin page 54

Reissued: 27-Nov-13
Model:
MET-C1ab / ab_SOP, MET-C1yz / yz_SOP
Subject:
Firmware Release Note: PCL Font
From:
1st Tech Service Sect., MFP/Printer Tech Service Dept.
Classification:
Important Information about Normal/Smart Panel Firmware Updates
 When updating machine firmware, make sure NOT to install Smart Panel supported
firmware on a machine with a normal operation panel (and vice-versa). If you do, the
machine may not function as designed and product warranty may not apply.
 To avoid this, when updating the firmware, make sure that the numbers next to "NEW" and
"ROM" are the same on the operation panel.
 If you install the wrong firmware, repeat the update procedure and check the numbers
mentioned above.
This RTB has been issued to announce the firmware release information for the PCL Font.
Version Program No.
1.13
Note: Definition of Availability of RFU via @Remote
"Available": The firmware can be updated via RFU or SD card.
"Not available": The firmware can only be updated via SD card.
Version
1.13 1st Mass production
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
D6415758A
Modified Points or Symptom Corrected
B
ulletin
Date:
Part information
Electrical
Transmit/receive
Other (Firmware)
Effective Date
1st Mass production
18-Jun-13
Prepared by:
Action required
Service manual revision
Retrofit information
Tier 2
Availability of RFU
Available
PAGE: 1/1
No
RD147024a
.:
N. Yoshida