Model:
MET-C1b
SOLUTION
Temporary solution
The shape of the gold plate in the rear of the PCDU which contacts the bias terminal
was also changed (planned for application to the production line in Dec.)
.
Note: This allows the correct development bias to be applied, even if the spring is bent.
Permanent solution
The shape of the spring in the rear of the PCDU which contacts the bias terminal was
also changed (planned for application to the production line in Dec.)
The shape of the bias terminal spring on the mainframe was changed (July 8).
After
T
echnical
Temporary solution - install this new part (D1492329: PCDU Rear Cover)
Before
B
ulletin
Date:
28-Nov-13
New part number: D1492329
PAGE: 2/2
No.:
RD147084