Ricoh MP C4503 Technical Bulletin page 73

Reissued: 26-Dec-16
Model:
MET-C1ab_SOP
Version
14. In the case of the following conditions, when attempting to log in to a device with
15. When an unnecessary authentication method is configured in the
3.15 Symptom corrected:
-
-
-
Important: To apply this change, in addition to this firmware, you also need to update
CheetahSystem firmware to the following version or later.
CheetahSystem : 1.45 (D1501442D)
CheetahSystem(CHN) : 1.45 (D1501459D)
Other changes:
Support for the Portuguese orthography.
3.14 Symptom corrected:
- When scanning an original containing multiple pages with the Twain driver, error
(code: 36856) occurs on the client PC and scan stops midway.
- Running stapling jobs continuously from the Fiery controller causes the job to stop
although the operation panel shows "Printing" status.
- Fax data encoded with Base64 is not correctly received.
- [WebAPI] counter information cannot be obtained without logging in.
3.13.1 Other changes:
A minor change only for the Japanese model.
3.13 Symptom corrected:
1.
2.
3.12 Symptom corrected:
1. When the CTS protection function is enabled, the throughput for the wireless LAN
2. When scanning documents of different sizes with all of the following configured, a
T
echnical
Modified Points or Symptom Corrected
occurs and "Invalid site certificate" is displayed in the browser.
CAP v2 installed, the attempt may fail with the "Failed to authenticate. Address Book
is being updated." error message.
- The FAX function is enabled on the device.
- "Logout Using Card" is set as "On" in the CAP configuration tool.
application-specific authentication setting of an SDK application, the icon is not
displayed on the home screen in logout status.
If "Store and Skip Error Job" is enabled, Job History will not appear.
( [User Tools] -> [Printer Features] -> [System] -> [Store and Skip Error Job] )
If an email sent by scan-to-email is opened in Office 365 cloud mail service, contents
of the attached file may falsely appear in the body of the message with the
characters corrupted.
Login screen appears even if "Home Key Customization: Login Setting
(SP5-074-002)"is set to "1(OFF)."
Limitless Paper Feed function may not work with the bypass tray.
When scanning with "Hungarian" or "Polish" selected under "Cognitive Language" in
"OCR Settings", if the value of a Unicode character exceeds 256, then the character
will be converted to a question mark ("?").
This firmware is dependent on the following firmware module. Please be sure to
update it:
- Scanner firmware: v2.23 or later
connection is reduced.
send error occurs:
- Set the original feed type setting for original orientation to "Readable
orientation".
- Enabling "Auto detect" and "Mixed original sizes".
B
ulletin
Date:
01-Aug-13
PAGE: 4/11
No
RD147031y
.: