Ricoh MP C4503 Technical Bulletin page 433

Model:
MET-C1b
Stapling capacity exceeded
Booklet stapling
The following dialog is displayed when the maximum number of sheets in a stapled set is reached
during the scanning of the originals. The user is prompted before printing begins.
[Stop] The job is canceled (no further scanning, no printing)
[Continue] Sets are stapled at maximum capacity in batch and exited.
Example:
- The machine stops scanning after 20 out of 30 originals are scanned.
- The message shown above is displayed.
- If [Continue] is selected, printing starts and sheets are stapled in batch in sets of 20 sheets and
10 sheets.
SP5199
This SP sets whether to staple sheets stacked in the staple tray or finisher before exiting.
: Behavior depends on the type of finisher attached.
0 (default)
: Sheets are exited without being stapled.
1
: Sheets are stapled and exited.
2
Note: To use this SP, you need to install the following System/Copy firmware version or newer:
Metis-C1ab
Metis-C1cde
Metis-C1ab (SOP)
Metis-C1cde (SOP)
echnical
T
Version 1.14
Version 1.18
Version 3.05
Version 3.06
ulletin
B
Date:
15-Apr-15
PAGE: 2/3
No.:
RD147142