Ricoh MP C4503 Technical Bulletin page 362

Model:
General RTB
Subject:
Procedure to disappear the changing password
screen
From:
2nd Tech Service Sect., MFP/P Tech Service Dept.
Classification:
IMPORTANT NOTICE about Machine Security
Overview
 When you install MFPs containing the firmware versions mentioned below (or later),
the user must change the passwords for the Supervisor and Administrator 1
before using the machine. The "Program/Change Administrator" screen is displayed
at first power ON. This is to enhance machine security.
 Before the user changes these passwords, however, customer engineers must
configure some installation settings.
 To do both of these operations, follow the Procedure below.
Reason
MFP Operator's Instructions advise the customer to change the passwords for the
Supervisor and Administrators before using the machine, but some customers do not do
this. If the MFP is used with blank passwords, there is a risk of unauthorized access via
the Internet. The customer's valuable information/data may be leaked.
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
B
ulletin
Date:
25-Sep-13
Prepared by:
Part information
Electrical
Transmit/receive
Other ( )
PAGE: 1/3
No.:
RGene065
K. Moriizumi
Action required
Service manual revision
Retrofit information
Tier 2