Ricoh MP C4503 Technical Bulletin page 284

echnical ulletin
T B
PAGE: 10/15
Model: Date: No.:
MET-C1b 18-Feb-14 RD147099
26. Attach the paper feed motor unit.
IMPORTANT: To do this, hook the bracket onto the plate, hook the timing belt onto the
motor pulley, and then attach/load the spring.
Attach the two springs (a) only part of the way (do not tighten all the way), and make sure
that the motor unit can be moved side to side (L-R).
a
a
27. Rotate the white gear by hand, and "break in" the timing belt.
28. Firmly attach the 2 screws for the paper feed motor bracket (which you fixed
temporarily in #26).
Note: The photo shows the harness guide after it has been attached.
1
2
2