Download Print this page

Ricoh MP C4503 Technical Bulletin page 5

Model: met-c1ab, met-c1ab_sop
Hide thumbs Also See for MP C4503:

Advertisement

Reissued: 27-Dec-16
Model:
MET-C1ab, MET-C1ab_SOP
Version
The engine log data will be transferred before the machine shuts down in cases where
an engine SC has initiated an auto-reboot (which happens when SC auto-reboot is
enabled).
Sysmptom corrected:
1. The main motor does not stop turning if a non-feed jam occurs during a duplex job.
2. The fan does not stop turning if a job with mixed A3/DLT sizes is cancelled during
printing.
3. SC670 occurs if a paper jam occurs, a machine door or cover is opened, or other
operation that stops machine operation is initiated while Process Control is
underway.
4. Cannot print under the following conditions:
5. The paper feed motor may not stop when B5-LEF is fed from Tray 4.
6. Other changes:
1.24 :08
Symptom corrected
1. "Error" is displayed on the EFI controller screen (on the PC) for a very short time
while the machine is in Energy Saver mode.
2.
controller).
1.23 :08
Symptom corrected:
A remote call for "Waste toner bottle Full" is mistakenly sent when the bottle is replaced
just following the Near Full condition.
1.22:08
Symptom corrected:
1. SC687 occurs when a copy is made using the exposure glass after the machine
recovers from Energy Saver mode.
2. SC544-02 and SC554-02 cannot be cleared by replacing the fusing unit and
executing SP5810-02 (hard high temp. detection).
Other changes:
3. When the printable area extension option is installed, it is possible to set
SP2-400-001 in order to switch between Process Control and fusing-related SP
settings.
1.21:08
1st Mass production
T
echnical
Modified Points or Symptom Corrected
-
Print job is initiated while the machine is in Energy Saver mode
-
B/W duplex printing
-
LT, LEF, plain paper
-
First page of data is text only, second and later pages contain images
The SP values listed below were changed for the following reasons:
-
To prevent the issue of the ACC not stopping
-
To prevent toner scattering
Note: The values vary depending on the model and destination.
SP3-234-011- 014, 021 - 024, 034, 050
SP3-624-007, 035, 071
SP3-627-001
SC452 occurs if the Energy Saver key is pressed while the front cover is open (EFI
B
ulletin
Date:
18-Jun-13
PAGE: 5/5
No
RD147001w
.:

Hide quick links:

Advertisement

loading