Ricoh MP C4503 Technical Bulletin page 434

echnical ulletin
T B
PAGE: 3/3
Model: Date: No.:
MET-C1b 15-Apr-15 RD147142
PRINTER
Corner stapling
When the sheets stacked in the staple tray reach capacity, the remaining sheets in the job are
cancelled (they are not printed) and an error is recorded in the log. The sheets in the staple tray
are exited without being stapled.
Note: The log can be accessed by tapping the [Error Log] button, as shown below.
Booklet stapling
Same as with corner stapling.
Bit switch 1001-011 Bit 3
This bit switch sets whether to perform stapling in batches.
When this switch is set to 1 (default: 0), even if the sheets stacked in the staple tray reach
capacity, the machine will continue printing out the remaining sheets in the job.
When SP5-199 is set to 1 and the first batch is exited with stapling, the following batch is done with stapling as well.
MFP + SR3130
COPIER
Corner stapling
Same as with COPIER (Booklet) described above.
SP5199
Same as with COPIER (SP5199) described above.
PRINTER
Corner stapling
The stapled sets are exited in batches.