Ricoh MP C4503 Technical Bulletin page 21

Reissued: 27-Dec-16
Model:
MET-C1ab
Version
10.00.00 Symptom corrected:
-
-
-
08.00.00 Symptom corrected:
-
07.00.00 Symptom corrected:
-
-
-
-
-
-
-
-
-
-
06.00.00 Symptom corrected:
A stored reception document is deleted if a paper loading error (incorrect loading or tray
overload） occurs when the user tries to print it out.
05.00.00 Symptom corrected:
SC899 occurrence
04.00.00 Symptom corrected:
1.
2.
3.
03.00.00 Symptom corrected:
The FAX may stall if the user tries to delete 252 or more Broadcasting addresses at
once.
02.00.00 Symptom corrected:
A Fax transmission error is displayed when the user tries to send a fax.
01.04.00 Specification change:
Improvements for more intuitive operation were applied.
01.03.00 Symptom corrected:
SC899 (Detail Code: FCS) may occurs when the machine recovers from Energy Saver
mode.
IMPORTANT: To apply the above change, in addition to this firmware, make sure to
update the GWFCU firmware to ver05.00.01.
T
echnical
Modified Points or Symptom Corrected
Updating the fax from version 06.00.00 or earlier to 07.00.00 or later may cause to
initialize the configuration.
Fax transmissions by Quick Fax are not counted for each user, if the User
certification is enabled.
The sender name may be printed even when the sender name printing function is
disabled.
Minor bug correction
The FAX stalls when a waiting error (e.g. Paper End) and reading error (e.g. paper
jam) occur at the same time.
The FAX stalls when automatic detection is enabled.
A stored reception job is not executed while the machine switches to Night mode.
A system warning is not displayed when the FAX function is launched.
The login screen is not displayed while Basic Authentication is enabled.
SC899 (software performance error) may occur when launching Easy FAX.
FAX transmission may fail.
SC899 (software performance error) may occur on the Main machine if a Remote
FAX is sent from the Sub machine.
SC899 (software performance error) may occur if the pre-transmission Preview is
enabled.
The FAX function may not start up following continuous FAX communication.
The settings linked to user-created icons on the Home screen are overwritten with
default settings if the FAX screen is set to Simplified Display before the icon is
selected.
SC899 may occur on the main machine if a Remote FAX is sent from the sub
machine.
The machine may freeze (which can only be cleared by power OFF/ON) if a FAX is
received while performing a Copy job that will require at least 5 minutes to complete
set for duplex, multi-page, and stapling.
B
ulletin
Date:
18-Jun-13
PAGE: 2/3
No
RD147004k
.: