Ricoh MP C4503 Technical Bulletin page 401

Reissued: 10-Jun-15
Model:
MET－C1b
RTB Reissue
The items in bold italics were corrected or added.
Subject
: Manual Revision: Installation procedure for
Smart Operation Panel Type M3
From:
1st Tech Service Sect., MFP/P Tech Service Dept.
Classification:
Service Manual Revision
Replace the Installation Procedure for the Smart Operation Panel with the following.
Applicable Models: D146/D147/D148/D149/D150, D176/D177
Service Manual:
Top Page > Smart Operation Panel Type M3 > Installation > Installation Procedure
-----------------------------------------------------------------------------------------------------------------------------------
PROCEDURE
IMPORTANT:
 Do the following when changing from the standard screen to the Android screen.
 The Smart Operation Panel Type M3 is not available as an option in the EU region. It is
available as an option in other markets.
Before installing the Smart Operation Panel
Before you install the Smart Operation Panel Type M3, it is necessary to do the following
procedures in order:
- Writing the System/Copy firmware and Package Firmware for Smart Operation Panel to
an SD card
- System/Copy Firmware and Package Firmware Update
- SP Settings
Writing the System/Copy firmware and Package firmware for Smart Operation Panel to an
SD card
1. Create two folders inside an SD card and name them "romdata" and "package".
2. Copy the system/copy firmware for Smart Operation Panel (xxxxxxxx.fwu) to the
"romdata" folder.
3. Copy the Package firmware for Smart Operation Panel (xxxxxxxx.pkg) to the "package"
folder.
echnical
T
Troubleshooting
Mechanical
Paper path
Product Safety
ulletin
B
Date:
28-Jan-15
Prepared by:
Part information
Electrical
Transmit/receive
Other ( )
PAGE: 1/4
No.:
RD147131a
E. Hinata
Action required
Service manual revision
Retrofit information
Tier 2