Removing and installing radio
remote control unit
Removing and installing front radio
remote control unit
See Group 61, Removing and installing radio
control unit
Removing and installing rear radio
remote control unit
•
Remove rear seat.
....................................................See Group 52
a
•
Disconnect plug (arrow).
1
•
Remove screws (2).
•
Remove remote control unit (1) and pull cable
with plug through grommet (arrow).
•
Installation is the reverse of the removal proce-
dure.
X
Tightening torque:
Seat, rear, to rear frame ................................. 9 Nm
65.6
Removing and installing aerial
holder
e
Caution:
Cap (4) can be damaged as you attempt to remove
it.
•
Turn cap (4) 1/8 of a turn to release bayonet lock
and remove cap (4).
•
Remove the clamping nut (3).
•
Remove the rod antenna (5).
•
Remove rear seat.
KL610390
....................................................See Group 52
a
•
Remove top case.
....................................................See Group 46
a
•
Remove cover for rear carrier.
•
Remove left side section of fairing.
•
Remove the left-hand battery cover.
2
KL650130
•
Disconnect plug (arrow) of radio control unit.
•
Open cable ties, pull cable toward rear and re-
move.
5
4
3
KL510010
KL510140