Removing and installing Motronic
control unit
d
Warning:
Comply with safety precautions when handling or
working with fuel; note that the fuel lines are pressu-
rised.
•
Remove fuel tank.
....................................................See Group 16
a
e
Caution:
Disconnect ground lead from battery and insulate.
•
Remove the fasteners (arrows).
•
Pull Motronic control unit out of central plug.
•
Installation is the reverse of the removal proce-
dure.
L
Note:
Make sure that the seal at the central plug is cor-
rectly seated.
Replacing intake air filter element
See Group 00
Replacing air temperature sensor
–
Remove left and right fairing side sections.
....................................................See Group 46
a
–
Remove front seat with bridge.
....................................................See Group 52
a
•
Remove fastener securing fuel tank to frame.
•
Pull fuel tank toward rear to disengage it from its
holder.
1
KL130020
•
Disconnect plug (1) of temperature sensor.
•
Remove temperature sensor (2).
•
Installation is the reverse of the removal proce-
dure.
X
Tightening torque:
Temperature sensor in intake air silencer ..... 15 Nm
2
KR130120
13.5