Seat - BMW K 1200 LT 1999 Repair Manual

BMW AG Motorcycle Division
Pre-delivery check
K 1200 LT
Customer
Order No.
Check the shipping crate for damage
Unpacking the motorcycle
– unpack
– inspect for damage
– check that delivery is complete
Installing remaining items on motorcycle
– Fit front wheel and mudguard
– Fit the mirror
– Fit the right-hand side footrest and passenger footrest plate
– Fit engine spoiler, reversing aid actuation, bumpers
– Install the top case
Fill and charge the battery (mark with charging date)
Check the front/rear brake fluid level
Check clutch fluid level
Check tyre pressures
Check rear wheel studs for tightness (note correct tightening torque)
Fit antenna, windshield
Checking and adjusting the motorcycle
– Check function of side stand contact switch
–

Seat

– Top case
– Headlight, spring strut
Add fuel
Final inspection and function check
– Check engine oil when engine is cold
– Clutch, gearshift mechanism, reversing aid
– Lighting and signalling equipment, telltale lights, instruments
– Check radio for operation
– Hand brake and foot brake, ABS
– Check optional equipment for operation
CD player, on-board computer, cruise control
– Trial run if necessary
Confirm pre-delivery check in Service and Technical Booklet
Final cleaning
Motorcycle handed over on:
Order No. 01 71 9 799 278
Licence plate No.
Mechanic's signature
Motorcycle keys
Top case lock cylinder
Toolkit and helmet lock
Documentation
Top case (packed separately)
Optional extras
UX-VS-2, 01/99
BMW
Pre-delivery check
Printed in Germany