Removing and installing battery
cover
–
Remove fairing side section.
L
Note:
The bottom fastener of the left-hand rear footrest
plate is also the anchorage point for the battery car-
rier. When removing the battery cover, slacken but
do not remove this screw.
–
Slacken screw securing rear footrest plate.
•
Open case.
•
Open the front seat.
•
Remove fastener (arrow) from cover.
•
[Left] Remove the rear seat.
•
[Left] Remove fasteners (1, 3) securing lifting
handle (4).
•
[Left] Remove lifting handle.
•
Remove 4 fasteners (2, 6) securing battery
cover (4).
•
Remove battery cover (5).
•
Installation is the reverse of the removal proce-
dure.
X
Tightening torques:
Lifting handle to rear frame M6....................... 9 Nm
Fairing sections .............................................. 2 Nm
Rear seat to rear frame................................... 9 Nm
46.14
1
6
5
2
3
4
KL460210