2
Removing and installing instrument
panel
–
Remove left and right fairing side sections.
....................................................See Group 46
a
–
Remove left and right handlebar trim.
–
Remove cover of fork bridge.
–
Remove upper section of fairing.
–
Remove instrument cover.
•
Release fasteners (6).
•
Disconnect plug (3) for the clock.
•
Pull the instrument cluster out of holder (2).
•
Remove the telltale lights (5).
L
Note:
Fasteners (4) hold the instruments in the
housing (1): the screws are of different lengths and
have different coatings. Make sure they are re-
installed in their original positions.
•
Release fasteners (4), remove the contacts and
loosely reinstall fasteners (4).
•
Installation is the reverse of the removal proce-
dure: pay particular attention to the following.
•
Install the contacts and telltale/warning lights in
the instrument cluster in accordance with the ca-
ble colours.
X
Tightening torques:
Instrument cluster to fairing holder ................. 6 Nm
62.6
1
5
3
4
6
KL620020