BMW K 1200 LT 1999 Repair Manual page 313

•
Remove retaining plate (1) for brake line from the
battery carrier.
2
3
•
Slightly raise ABS control unit (2) complete with
battery carrier (3) and pull the assembly toward
the rear.
•
Release the retaining screws (arrows).
e
Caution:
Take care not to scratch the frame while removing
the ABS pressure modulator; cover with masking
tape as necessary.
•
Remove ABS control unit (2).
34.16
1
KL340170
KL340060
2
KL340220
3
•
Remove battery carrier (3), if necessary.
•
Using a small screwdriver, press end cover (5) of
ABS relay housing (4) in (arrow) and at the same
time pull end cover (5) upwards.
•
Scrap the old cover (5).
•
Release the fasteners (arrows) for the cables and
plug connector (7) at ABS relay base (6).
KL340210
4
5
KR340390
6
7
KR340030