BMW K 1200 LT 1999 Repair Manual page 280

8
7
e
Caution:
Never use a hammer when slackening off hex
nut (5), or else the splines may be damaged.
d
Warning:
Hex nut (5) requires a high torque to loosen it.
h
120
33 1 720
h
33 1 700
100
KL330060
2
1
L
Note:
Use temperature measuring device,
BMW No. 00 1 900, to check heat rise.
•
Heat hex nut (5) on the input bevel pinion (6) to
100 °C (212 °F) and unscrew with a 36 mm
(1.4 in) socket wrench insert and reducing
adapter, BMW No. 33 1 720.
d
Warning:
Threaded ring (3) requires a high torque to loosen it.
•
Heat the housing neck to 120 °C (248 °F) and un-
screw threaded ring (3) with pin wrench,
BMW No. 33 1 700.
•
Remove thrust ring (4) and outer race (1).
•
Slacken screws (8).
•
Remove locking arm from holder,
BMW No. 33 1 510.
•
Remove screws (8).
•
Remove housing cover (7).
•
If necessary, use a drift to drive out shaft sealing
ring (2).
3
4
5
6
KL330050
33.9