1
6
7
Removing/installing interior trim
–
Remove tank cover.
–
Remove windscreen.
–
Remove instrument cover (1).
–
Remove handlebar trim.
–
Remove cover of fork bridge.
•
From the left, disconnect light (2).
•
Disconnect plug (4) for lighting.
•
Remove headlight adjuster (5).
•
Remove screws (3, 6).
L
Note:
Protect interior trim against scratching.
•
Use masking tape to cover tabs (arrows) on han-
dlebars and interior trim.
46.20
2
•
Carefully remove interior trim.
•
Disconnect plug for on-board computer.
•
Remove on-board computer, if necessary.
•
Installation is the reverse of the removal proce-
dure: pay particular attention to the following.
•
Connect plug (4) for lighting at bottom position.
Removing and installing left/right
wind deflectors
–
Remove instrument cover (1).
•
Remove 2 fasteners from instrument cover.
•
Remove wind deflector (7).
KL460420
3
4
5
KL460240