BMW K 1200 LT 1999 Repair Manual page 284

1
•
Attach locking arm (1).
2
•
Insert outer race (2).
•
Coat threaded ring (3) with Hylomar SQ 32.
•
Tighten threaded ring (3) with pin wrench,
BMW No. 33 1 700.
•
Oil thrust ring (4) lightly and place in position.
L
Make sure that the lip of the shaft seal is seated
correctly on the thrust ring.
•
•
e
33 1 720
Make sure that the nut does not damage the shaft
sealing ring.
Keep thread-locking compound well clear of splined
shaft: wipe off all deposits immediately.
33 1 700
•
X
KL330060
Threaded ring
(clean thread + Hylomar SQ 32) ................. 118 Nm
Nut for input bevel pinion
(clean thread + Loctite 270)........................ 200 Nm
Housing cover .............................................. 35 Nm
3
4
5
KR330370
Clean the threads of hex nut (5).
Coat the thread of hex nut (5) with Loctite 270.
Caution:
Tighten hex nut (5) with 36 mm (1.4 in) socket
wrench insert and reducing adapter,
BMW No. 33 1 720.
Tightening torques:
33.13