Removing and installing left/right
46 63
rear trim panel
–
Remove seat.
2
3
•
Unclip cover (arrow).
•
Remove 2 screws (1).
•
Remove screw (2).
•
Remove the bezel.
e
Important:
Note second washer (3) when installing.
•
Installation is the reverse of the removal proce-
dure: pay particular attention to the following.
•
Clean the tapped bore in the rear frame and the
threads of the cover securing screw (2), coat
threads with Loctite 243 and install the screw.
X
Tightening torques:
Trim panel to rear frame ................................. 4 Nm
Trim panel to rear frame (mount for case holder)
(clean thread + Loctite 243)............................ 4 Nm
Removing and installing left/right
46 63
grip
–
Open the stowage compartment.
–
Remove left/right silencer (
•
Remove turn-indicator cover.
•
Disconnect cable and pull through.
•
Remove turn indicator.
1
E460130
•
Remove screws (1).
•
Remove screws (2).
•
Remove bracket (3) and grip.
•
Installation is the reverse of the removal proce-
dure.
X
Tightening torques:
Grip to rear frame........................................... 9 Nm
Turn indicator to tail section ........................... 3 Nm
18.5).
a
1
3
2
E460120
2
E460111
46.9