Communication Setting Contents - Mitsubishi Electric GT1695M-XTBD User Manual

10.1.3 Communication setting contents

This section describes setting items and display contents for Communication Setting.
(4)
(4)
(1) Channel-Driver assign
Channel No. can be assigned to the communication driver installed in the GOT.
(a) Communicating without setting [Communication Setting] of GT Designer2
Even without setting [Communication Setting] on GT Designer2, communication with controller
is available by assigning channel No. with this function.
(b) Changing the assignment of communication drivers to channels in the utility
Without using GT Designer2, the assignment of communication drivers to channels can be
changed.
(When change a communication driver, the alternative communication driver has to be
installed in GOT in advance.)
(2) Standard interface display BOX
Display the communication interface included as standard in GT16
There are the following 4 types.
RS232 ••••••••• For communicating with PC (GT Designer2), controller
RS-422/485••• For communicating with controller
USB •••••••••••• For communicating with PC (GT Designer2)
Ethernet ••••••• For communicating with PC (GT Designer2), controller
10
10.1 Communication Setting
- 2
10.1.3 Communication setting contents
(2)
(5)
(2)
(4)
(5)
(2)
(5)
10.1.4 Channel-Driver assign operation
(6) (1)
(2)
(5)
(2)
(5)
.