9.3.5
Utility call key setting
1
Utility call key setting function
The key position for calling the main menu of the utility can be specified.
For the key position, 1 point can be specified from 4 corners on the screen.
By keeping pressing the screen, a setting to switch the screen to the utility is available.
This prevents a switching to the utility by an unintentional operation.
2
Utility call key display operation
Main menu
(
8.3 Utility Display)
Touch
[GOT setup]
9
9.3 Operation Settings (Settings Regarding Operation)
- 50
9.3.5 Utility call key setting
Operation settings by GT Designer2
Set the utility call key at [GOT set up] in [System Environment] of GT Designer2.
When change a part of the setting after downloading the project data, change the
setting by [Display] screen of the GOT.
GT Designer2 Version
(3.8 Setting of the GOT display and operation (GOT setup))
GOT setup
Utility call key
Screen Design Manual
Operation
Touch
[Operation]
Touch
[Utility call key]
Touch buttons to set
for the utility call key