Mitsubishi Electric GT1695M-XTBD User Manual page 128

5 When the USB interface is used, unfix the latch to open the cover, and then connect the USB
cable.
8 Stand
1 Set the stand so that the front side of the GOT to be mounted faces the front.
2 Adjust the mounting angle of GOT with the angle adjusting screw of the stand.
3 Put the GOT into the Stand from the front side and fix it using the fixtures.
For the GOT mounting method, refer to the following.
7
7.3 Option
- 45
7.3.2 Installation procedure
Precautions for use USB environment cover
When the USB environmental protection cover is closed, the USB interface
complies with the protective structure IP67.
In this case, the USB environmental protection cover must be fixed by pushing the
mark on the latch firmly.
Environmental protective structure of USB interface is "IP2X" when the USB
environmental cover is opened.
5.5 Installation Procedure