Mitsubishi Electric GT1695M-XTBD User Manual page 217

2 The screen switches to the detail setting screen.
Set communication parameters from this screen.
Refer to the following for the setting change operation.
8.3.3 Basic operation of settings change
(1) Communication parameter setting by Designer2
Set the communication parameters for each communication driver at
[Communication Settings] in [System Environment] of GT Designer2.
When change the communication parameters after downloading project data,
change the setting at communication detail setting of GOT.
(2) For the Ethernet multiple connection
Touch the driver display BOX of the Ethernet connection, and then the
communication detail setting screen of Channel No. 1 is displayed.
Communication parameter
GT Designer2 Version Screen Design Manual
(3.7 Communication Interface Setting (Communication setting))
10.2.2 Communication detail setting display operation
10.2 Communication Detail Setting
9
10
11
12
13
14
15
16
10
- 13