Chapter 11 Communication Interface Setting (Communication Setting); Standard I/F Setting; Standard I/F Functions; Standard I/F Display Operation - Mitsubishi Electric GOT SIMPLE Series User Manual

11
COMMUNICATION INTERFACE SETTING
(COMMUNICATION SETTING)
The following communication interfaces can be set.
Item
Comm. Setting Standard I/F
GOT IP Address
Ethernet communication
Comm. Monitor
Ethernet check
Transparent mode
Keyword
11.1

Standard I/F Setting

Standard I/F functions

Function
Channel no. display
Communication driver display
Communication parameters display

Standard I/F display operation

Main Menu
Functions overview
Assigning channel number and communication driver to communication
interface
Configuring GOT Ethernet setting
Displaying the contents of Ethernet setting, changing the host
Checking the serial communication port communication
Checking the Ethernet communication port communication
Setting the channel No. to be used for the communication for the FA
transparent function
Setting or deleting sequence program protection key words and canceling
sequence program protection status for the FXCPU connection
Description
Displays the channel number (CH No) that has been assigned by drawing
Displays the communication driver that has been assigned by drawing software
Displays the communication parameters of the controllers that has been assigned by drawing software
Touch
[Comm. Setting].
11 COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
Comm. Setting
Touch
[Standard I/F].
Standard I/F
Reference
Page 75 Standard I/F Setting
Page 84 GOT IP Address
Setting
Page 86 Ethernet
Communication
Page 90 Communication
Monitor
Page 93 Ethernet Check
Page 95 Setting the
Transparent Mode
Page 96 Keyword
11.1 Standard I/F Setting
11
75