Mitsubishi Electric GT1695M-XTBD User Manual page 276

(b) Data link information
Displays the CC-Link communication unit (GT15-J61BT13) data link startup status and error.
No.
(2) D-Link Boot Status
(3) Error Status
12
12.1 Diagnostic Functions
- 29
12.1.8 Network status display
Item
Displays the data link startup status.
D-Link in prog.
D-Link Offline
Initialize
Parameter wait
Disconnect (No Polling)
Disconnect (Line Err)
Disconnect (Other)
Testing Line
Testing Pram Setup
Auto Reconnecting
Reset. in prgr.
Displays the status of the current error.
Normal
Invalid TransPath
Invalid Parameter
CRC Error
Time Out Error
Abort Error
Invalid Setup
Other Abnormality
Description
: Data link being executed
: Data link being stopped
: Set to the initial status
: Parameter not received
: In cut-off status with no inquiry from
master station
: In cut-off status due to line error
: In cut-off status due to other causes
: Line test being executed
: Parameter setting test being
executed from master station
: Return processing being executed
automatically
: CC-Link communication unit being
reset (GOT reset status)
: Normal status
: Transmission path error detected
: Parameter error detected
: Reception data error detected
Timeout error detected in data
:
reception
Error detected in data
:
communication
: Invalid station number, station type,
transmission speed, or mode setting
detected
Error due to some other cause
:
detected