Mitsubishi Electric GT1695M-XTBD User Manual page 359

(5) Download operation
Transfers the special data written in the A drive (Standard CF Card), B drive (Extended memory
card) or E drive (USB drive) to the C drive (Built-in flash memory).
The GOT monitors C drive data.
(This item explains using the A drive.)
Special data to be stored in a CF card
When storing the project data from GT Designer2 to CF card, select [C: Built-in flash
memory] for [Project Data] in [Boot Drive].
(Continued to next page)
1 Install a CF card or USB memory on the
GOT. Refer to the following for inserting/
removing method of CF card or USB
memory.
7.3.2 CF card
7.5.2 USB memory
2 Touch [A: Standard CF Card] in Select
drive.
13.2 Various Data Control
13.2.6 Special data information
9
10
11
12
13
14
15
16
13
- 80