Mitsubishi Electric GT1695M-XTBD User Manual page 396

(b) Setup operation
Sets the project data stored in the A drive (Standard CF Card), B drive (Extended memory
card) or E drive (USB drive) to be used in the GOT.
The GOT monitors using the monitor data in the A drive or B drive.
(This item explains using the A drive.)
13
13.3 OS/Project Information
- 117
13.3.2 Project information
Before setup operation
When storing project data from GT Designer2 to CF card, select [A: Standard CF
Card], [B: Extended memory card] or [E: USB drive] for [Project Data] in [Boot
Drive].
1 Install the CF card or USB memory in
GOT.
Refer to the following for inserting/
removing method of CF card or USB
memory.
7.3.2 CF card
7.5.2 USB memory
2 Touch [A: Standard CF Card] in Select
drive.
3 If touch the
Download
box mentioned left is displayed.
If touch button, the setup is
OK
executed.
4 When the setup is completed, the dialog
box mentioned left is displayed.
Touching the
OK
GOT.
button, the dialog
button restarts the