Mitsubishi Electric GT1695M-XTBD User Manual page 397

(7) Upload/setup cancel operation
(a) Upload operation
By upload operation, the project data is transferred from the C drive (Built in flash memory) to
the A drive (Standard CF card), B drive (Extended memory card) or E drive (USB drive).
The CF card or USB memory after uploading can be used for downloading project data to
another GOT.
(This item explains using the A drive.)
Before setup operation
The project data cannot be uploaded to the A drive, B drive or E drive when the
project data of the A drive, B drive or E drive is set up.
Execute setup cancel (
project data.
(7) (b) Setup cancel operation) before uploading the
1 Touch [A: Standard CF Card] in Select
drive.
2 If touch the
Upload
mentioned left is displayed.
3 Touching the
uploading.
4 If any project data with the same name
exists in the A drive, the screen shown left
is displayed without starting uploading.
In this case, touching the
overwrites the project data of the A drive
with the project data with the same name
of the A drive.
Touching the
uploading.
5 When the uploading is completed, the
dialog box mentioned left is displayed.
Touching the
GOT.
13.3 OS/Project Information
13.3.2 Project information
button, the screen
button executes
OK
button
OK
button cancels
Cancel
button restarts the
OK
13
- 118
9
10
11
12
13
14
15
16