Mitsubishi Electric GT1695M-XTBD User Manual page 452

Error
code
605 USB device I/F error
Multimedia processing
606
unit is not mounted.
Insufficient memory
610
capacity.
Improper job files.
611
Confirm job setting.
Cannot access Logging
612 Files Check the memory
card
613 Error in writing logfile
614 Error in reading logfile
Cannot connect to MES
615
Server. Check the Server.
Cannot connect to SNTP
616
Server. Check the Server.
630 Failed to save a video file.
Failed to save a video file
631
on network.
Error detected during
632
multimedia processing.
800 Abnormal module status
Abnormal baton passing
801
status
16
16.3 Error Message and System Alarm
- 31
16.3.2 List of error message/system alarm
Error message
The error may be caused by a failure in the GOT. Please
consult your local Mitsubishi (Electric System) Service center
or representative.
Multimedia unit is installed incorrectly.
Check that the multimedia unit is installed correctly.
The memory capacity for the MES interface function is
insufficient.
Delete unnecessary files, and reserve memory.
The contents for job files are unmatched with the settings for
job files.
Check if there are mistakes in the settings on the setting
screen.
1. Insert a CF card or USB memory.
2. Turn on the CF card access switch.
3. If the CF card or USB memory have unnecessary files,
1. Insert a CF card or USB memory.
2. Turn on the CF card access switch.
3. Check if the CF card or USB memory is writable.
1. Insert a CF card or USB memory.
2. Turn on the CF card access switch.
3. Check if the CF card or USB memory is readable.
The server does not work normally or the connection path to
the server is made up incorrectly.
1. Check the operating conditions of the server.
2. Check the network to the server.
The settings for the SNTP server are wrong or the network to
the SNTP server is made up incorrectly.
1. Check the operating conditions of the STNP server.
2. Check the network to the SNTP server.
Check the CF card available area, installation status,
cancellation of write-protect, format status and number of
saved files.
Check the activation status of personal computer linkage
software in file server, the setting of Ethernet FTP function of
GOT, the network setting of GOT and file server and the
available area of CF card installed in the GOT main unit.
Switch off the GOT and check the installation status of
multimedia unit, or change the multimedia unit.
Refer to explanations of SB0020 on the applicable network
manual.
Refer to explanations of SB0047 on the applicable network
manual.
Action
delete the files.
Channel
No.
storage
*1