Mitsubishi Electric GT1695M-XTBD User Manual page 391

(3) Copy operation
Uploads the project data written in the C drive (Built-in flash memory) to the A drive (Standard CF
card) / B drive (Extended memory card) / E drive (USB drive).
• Copying to another directory in the same drive
• Copying between A drive, B drive and E drive
Copy to/from C drive is disabled.
(This item explains using the A drive.)
1 Install CF card in the PC, in which create
a folder for the copy destination.
Set the same character with [System
Setting] of [System Environment] of GT
Designer2 for the folder name.
GT Designer2 Version
Design Manual
(3.1 GOT/Controller Type Setting)
2 Install the CF card mentioned above to
GOT.
Refer to the following for inserting/
removing method of CF card.
7.3.2 CF card
7.5.2 USB memory
3 Open [Project Information] screen to
select the file to copy.
4 If touch button, the message
Copy
[Please select a destination.] is displayed
in the left bottom of the screen.
5 If the copy destination folder is touched,
the screen display is changed to the folder
of copy destination.
At this time, it cannot be copied into the
same folder where the file exists.
Select other folders.
6 If touch button, the dialog box
Next
mentioned left is displayed.
13.3 OS/Project Information
13.3.2 Project information
9
10
11
Screen
12
13
14
15
16
13
- 112