Mitsubishi Electric GT1695M-XTBD User Manual page 272

No. Item
PARAM.ERR
F LOOP ERR
SD
RD
TOKEN PASS
DATA LINK
(2)
GOT R/W
R LOOP ERR
*: For monochrome display, it is displayed as
(b) Loop information
Displays the loop status of the CC-Link IE controller network communication unit
No.
IN: Loop Sts.
IN: LoopBK Sta
IN: LoopBK factor
(3)
OUT: Loop Sts.
OUT: LoopBK Sta
OUT: LoopBK factor
12
12.1 Diagnostic Functions
- 25
12.1.8 Network status display
LED
color*
Red Parameter error
Red IN-side error
Green Sending data
Green Receiving data
Green Baton pass being executed
Data link being executed
Green (Cyclic transmission exe-
cuted)
Offline, or hardware test,
self-loopback test, internal
Green self-loopback test or
station-to-station test being
executed
Red OUT-side error
Item
Displays the IN-side connection status of the host station. (Normal/Rev
connect)
Displays the station No. of the IN-side loopback station.
(No loopback station: ---, value: 1 to 120)
Displays the cause of the loopback. (No LoopBK Sta./OUT: cable
disconnection/OUT: connecting a line/OUT: wrong cable connection)
Displays the OUT-side connection status of the host station. (Normal/Rev
connect)
Displays the station No. of the OUT-side loopback station.
(No loopback station: ---, value: 1 to 120)
Displays the cause of the loopback. (No LoopBK Sta./IN: cable
disconnection/IN: connecting a line/IN: wrong cable connection)
Lit Not lit
No parameter error
No IN-side error
Not sending data
Not receiving data
Baton pass not executed
Data link not executed
Online or circuit test being
executed
No OUT-side error
(lit) or (not lit).
Description
Blink
Data link being executed
(Cyclic transmission stopped)
.