Mitsubishi Electric GT1695M-XTBD User Manual page 450

Error
code
Auto repeat error. Confirm
540
system information.
550 Invalid key code
Language switch failure.
560
Install optional functions.
Language switch failure.
561 Load expansion memory
board.
Recipe device points too
570
large.
Capacity shortage of user
571
memory (RAM)
Abnormal Advanced
581
recipe file
Cannot generate
582
Advanced recipe file.
Unable to save device
583 value to Advanced recipe
file.
Advance recipe file save
584
error
Advanced recipe file
585
upload error
16
16.3 Error Message and System Alarm
- 29
16.3.2 List of error message/system alarm
Error message
Error occurred while executing the auto repeat function of the
touch switch object.
Confirm the followings.
1. Confirm that the other system error has not occurred
2. Confirm that any error information is not stored in the
The key code input execution trigger was ON with the non-
target key code set in the key code storage device.
Confirm the key code supported by the object where error
occurs.
Switched language specifying KANJI other than Japanese
without the option OS installed.
Install the option OS.
Switched language specifying a KANJI region other than
Japanese without the option function board with add-on
memory installed.
Install the option function board with add-on memory.
The number of the set points of the recipe device exceeds the
specified range.
Put the number of the set points of the recipe device within
the specified range.
There is no empty area/space in D drive.
Format the D drive in the memory to secure free area.
Advanced Recipe cannot be executed for advanced recipe
file with incorrect contents. Delete the advanced recipe file
from the CF card or USB memory.
Cannot generate advanced recipe file. Confirm the following
and execute recipe processing again.
1. Confirm whether the CF card or USB memory is installed.
2. Confirm whether the CF card access switch of the GOT is
3. Confirm the available memory of the CF card or USB
Unable to save device value to advanced recipe file.
1. Confirm the write-protection of the CF card or USB
2. Confirm whether the attribute of saving file is for reading
An error has occurred during the advanced recipe file writing.
Do not pull out the CF card or USB memory while the
Advanced Recipe is operating.
An error has occurred during the advanced recipe file reading.
Do not pull the CF card or USB memory out while the
Advanced Recipe is operating.
Action
during auto repeat.
system information/GS during auto repeat.
ON.
memory.
memory.
only.
Channel
No.
storage