Mitsubishi Electric GT1695M-XTBD User Manual page 410

2 Installing the CoreOS
1 Write the CoreOS from GT Designer2 to the CF card.
For details of GT Designer2 operation, refer to the following manual.
2 After confirming that the GOT is powered off, install the CF card in the GOT.
After installing, switch the CF card access switch on.
3 Powering the GOT on displays the following screen.
To cancel the installation, power the GOT off and remove the CF card.
14
14.5 CoreOS
- 12
14.5.1 Installing the CoreOS
GT Designer2 Version
(8. TRANSFERRING DATA)
Basic Operation/Data Transfer Manual