Mitsubishi Electric GT1695M-XTBD User Manual page 394

(6) Download operation/setup operation
(a) Download operation
Transfers the project data stored in the A drive (Standard CF Card), B drive (Extended memory
card) or E drive (USB drive) to the C drive (Built-in flash memory). (The GOT monitors using
the data in the C drive.)
(This item explains using the A drive.)
(Continued to next page)
13
13.3 OS/Project Information
- 115
13.3.2 Project information
Before download operation
(1) Setup cancel
When the project data in the A drive or B drive is set up, the project data cannot
be downloaded to the C drive.
Execute setup cancel (
the project data.
(2) Project data to be stored in a CF card
When storing the project data from GT Designer2 to CF card, select [C: Built-in
flash memory] for [Project Data] in the [Boot Drive].
(7) (b) Setup cancel operation) before downloading
1 Install the CF card or USB memory in
GOT.
Refer to the following for inserting/
removing method of CF card.
7.3.2 CF card
7.5.2 USB memory
2 Touch [A: Standard CF Card] in Select
drive