Display Mpls Lsp - HP FlexFabric 12500 Command Reference Manual

Examples
# Display usage information for labels 900 through 902.
<Sysname> display mpls label 900 to 902
Label
900
901
902
Table 3 Command output
Field
Label
Owner
State

display mpls lsp

Use display mpls lsp to display LSP information.
Syntax
display mpls lsp [ egress | in-label label-value | ingress | outgoing-interface interface-type
interface-number | protocol { bgp | ldp | local | rsvp-te | static | static-cr } | transit ] [ vpn-instance
vpn-instance-name ] [ ipv4-dest mask-length | ipv6 [ ipv6-dest prefix-length ] ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
egress: Displays the LSPs taking the current LSR as the egress.
in-label label-value: Displays the LSPs using the specified label as the incoming label, in the range of 0
to 1048575.
ingress: Displays the LSPs taking the current LSR as the ingress.
Owner State
- Idle
- Idle
LDP Alloc
Description
Label value.
Protocol that is using the label. Possible values include LDP, BGP, and
L2VPN.
Usage state of the label:
•
•
•
•
Idle—The label is idle.
Alloc—The label has been allocated.
Pending—The label has been released but is still used by an LSP
entry.
Inuse—The label has been allocated and used by an LSP entry.
6