MCE configuration commands
This chapter describes only the commands related to the multi-VPN-instance CE (MCE) feature. For
information about the routing protocol configuration commands in the configuration examples, see Layer
3—IP Routing Command Reference.
description
Syntax
description text
undo description
View
VPN instance view
Default level
2: System level
Parameters
text: Description for the VPN instance, a string of 1 to 80 characters.
Description
Use description to configure a description for the current VPN instance.
Use undo description to delete the description.
Examples
# Configure a description for VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] description vpn1
display bgp vpnv4 vpn-instance group
Syntax
display bgp vpnv4 vpn-instance vpn-instance-name group [ group-name ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the VPN
instance name, a case-sensitive string of 1 to 31 characters.
group-name: Name of the BGP peer group, a string of 1 to 47 characters.
363